PBC and PBD Panels
Gauge
Net Girth
Yield (psi)
Weight Per Sq.
Finish
29 32" 80,000 78# Galvalume Plus® *
29 32" 80,000 78# Signature® 200‡
29 32" 80,000 83# Galvanized
26 32" 80,000 101# Galvalume Plus®*
26 32" 80,000 101# Signature® 200‡
26 32" 80,000 105# Galvanized
26 32" 80,000 101# Signature® 300‡
24 32" 50,000 128# Galvalume Plus®*
24 32" 50,000 128# Signature® 200‡
22†† 32" 50,000 162# Galvalume*
22†† 32" 50,000 162# Signature® 200‡
.024" Alum† 32" 18,000 40# Signature® 200‡ White only
†Perforated only
††"PBC" Panel not available
‡Signature is a registered trademark of NCI Group, Inc.
*Galvalume Plus is a registered and protected trademark of BIEC International, Inc. The Galvalume Plus® coating is subject to variances in spangle from coil to coil which may result in noticeable shade variation in installed panels.The Galvalume Plus® coating is also subject to differential weathering after panel installation. Panels may appear to be different shades due to this weathering characteristic. If a consistent appearance is required, MBCI recommends that pre-painted panels be used in lieu of Galvalume Plus®. Shade variation in panels manufactured from Galvalume Plus® coated material do not diminish the structural integrity of the product. These shade variations should be anticipated and are not a cause for rejection.
**150 Square Minimum Order
***200 Square Minimum Order

Consult the STEEL DEPOT COMMERCIAL/INDUSTRIAL OR “PBR”/”PBU” TECHNICAL/ERECTION MANUAL for proper product application, design details and other product information.

NOTES:

  1. Edge of panel in contact with concrete sheeting notch will result in excessive edge creep. Panel corrosion due to contact with concrete or any masonry product is excluded from Panel Warranty.
  2. All perforated material comes with a light oil coating. Panels should be wiped clean before installing.

IMPORTANT NOTICE TO INSTALLER/CUSTOMER: Material should be inspected carefully prior to installation for defects including excessive oil canning. Installation of material constitutes acceptance.

See Commercial / Industrial Color Chart for available colors