ARTESIA, NM

300 E. Richey
(575) 746-2412

CARLSBAD, NM

304 E. Wood
(575) 887-9000

HOBBS, NM

312 S. Magnum
(575) 397-4670

ROSWELL, NM

1900 E. Poe
(575) 623-5555

LUBBOCK (Phone sales only)

4125 E. Slaton Hwy
(806) 744-7092


CALL TOLL FREE
(800) 333-0222

CENTRAL SEAM PLUS®


The best choice for commercial and industrial applications

Central State Plus

Central Seam Plus®  is a traditional mechanically seamed profile. This workhorse panel has been UL580 tested for uplift and passed both air and water infiltration ASTM tests.

  • Floating clips allow for thermal roof expansion and contraction during extreme temperature changes.
  • Pre-punched panels, combined with self-engaging backup plates for ease of installation.
  • Reversible end-for-end panels so each side of the roof can be installed simultaneously.

Central Seam Plus is a field seamed trapezoidal roofing system available in 24" standard coverage and an optional 18" panel. Its floating clips allow for thermal roof expansion and contraction during extreme temperature changes. A factory applied sealant insures a weather-tight and secure lap. This panel can be used for both new construction and retrofit. Central Seam Plus is manufactured from Galvalume® which offers two to four times the corrosion resistance of galvanized steel.

  • Central Seam Plus begins and ends in the high, reducing the risk of leakage at the rake that can occur when finishing in the low.
  • Factory applied hot melt seam and clip sealant .
  • Large selection of clip sizes to accommodate various types of construction and insulation thicknesses.
  • A standard clip allows for a total of two inches of thermal movement and is constructed from 14 gauge material. The clip provides a 3/8" or 1 3/8" clearance at the purlin to reduce water ponding on low pitch roofs. Constructed from 12 gauge material, this clip is an integral part of maintaining panel module.
  • Panels can be pre-punched, combined with self-engaging backup plates for ease of installation.
  • Reversible end-for-end panels so each side of the roof can be installed simultaneously.
  • Panels are factory notched for ease of installation at the endlap.
  • Comprehensive step-by-step erection manuals.

Central Seam Plus

RESOURCES