|A ridged (double slope) building in which the ridge is off-center.
|The triangular portion of the endwall from the level of the eave to the
ridge of the roof.
|Red Oxide Primer
|Low rise construction
|Support widths from 10′ to 600′ or more
Support height from 10′ to 100′
Support clear spans up to 250′ or more
Support roof slopes of ¼ : 12 up to 12 : 12
FRAME TYPES AVAILABLE
|Designers have the capability of arranging sidewall columns that are straight or columns with the more economical tapered section.
|Flexible design providing for maximum utilization of interior space.
|NCI fabricates all main framing in accordance with the company’s strict AISI quality certification guidelines.
|The benefit of the quality fabrication practice of NCI is the reduction in building assembly labor, and subsequently lower installation cost.
|Interior support columns available as either pipe sections or H sections.
|Wider buildings are more economical.
|NCI frames come with welded subassemblies. Roof purlin support plates and wall girt support plates are factory welded to the main frames.
|Saves installation time and increases the overall stiffness of the building.
|Purlins are supported laterally by the welded plates.
|Reduces the amount of purlin roll experienced under heavy loading.
|NCI furnishes all structural bolts with a corrosion protective plating.
|Improves the appearance of the building and helps to speed up installation process, and no more rusted bolts to contend with.
|Frames are prefabricated as much as possible.
|Eliminates costly field work needed to “customize” the frames for specific building configurations.
|Endwall frames can be simple post and beam type construction, or can be built with a full interior type main frame to accommodate future expansion.
|Endwalls are furnished in a variety of configurations, again with the flexibility to meet any need.
|Economical savings on material costs.