ARTESIA, NM

300 E. Richey
(575) 746-2412

CARLSBAD, NM

304 E. Wood
(575) 887-9000

HOBBS, NM

312 S. Magnum
(575) 397-4670

ROSWELL, NM

1900 E. Poe
(575) 623-5555

LUBBOCK (Phone sales only)

4125 E. Slaton Hwy
(806) 744-7092


CALL TOLL FREE
(800) 333-0222

ROOFING, FACADE & NON-LOAD BEARING WALLS

ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
PANEL STARTER T-5111 N/A 10'-2" 3" 2.45#
NOTE: · Use with vertical applications only (Fascia)
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
CONTINUOUS CLEAT T-5121 N/A 10'-2" 3" 2.45#
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
OFFSET CLEAT T-5131 N/A 10'-2" 3-1/2" 2.89#
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
VENT DRIP T-5102 N/A 10'-2" 5" 4.90#
NOTE: · Use with HW-530 Plastic Vent Material
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
PERFORATED VENT DRIP FL-254 N/A 10'-2" 6-3/4" 5.58#
NOTE: · 24 gauge material - Galvalume Plus® only·
Use with T-5089 or T-5090 Ridge Flash for Vent
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
EAVE TRIM T-5141 4" 10'-2" 8-5/8" 7.04#
T-5142 4" 20'-2" 8-5/8" 14.08#
T-5143 3" 10'-2" 7-5/8" 6.14#
T-5144 3" 20'-2" 7-5/8" 12.28#
NOTE: · Specify roof slope or angle indicated on drawing
Specify open hem when using w ith T-5121 Continuous Cleat
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
EAVE WITH EXTENDED DRIP EDGE T-5151 N/A 10'-2" 9-5/8" 7.81#
T-5152A N/A 10'-2" 5" 4.22#
T-5152B N/A 10'-2" 5-3/8" 4.30#
NOTE: Use with roof slopes over 4:12·
Specify roof slope or angle indicated on drawing
Specify open hem when using with T-5121 Continuous Cleat
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
EAVE TO FASCIA TRANSITION T-5161 N/A 10'-2" 11" 9.00#
T-5162 N/A 20'-2" 11" 18.00#
NOTE: · Specify open hem when using with T-5121 Continuous Cleat·
Specify roof slope or angle indicated on drawing
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
ROOF TO FASCIA /SILL/SASH T-5171 N/A 10'-2" 9" 7.37#
T-5172 N/A 20'-2" 9" 14.74#
NOTE: · Specify open hem when using with T-5121 Continuous Cleat
Specify roof slope or angle indicated on drawing
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
SILL/HEAD SASH T-5181 1-1/4" 10'-2" 7" 5.73#
T-5182 1-1/4" 20'-2" 7" 11.46#
T-5183 2-1/4" 10'-2" 9" 7.37#
T-5184 2-1/4" 20'-2" 9" 14.74#
NOTE: · Specify angle indicated on drawing
ITEM PART
NUMBER		 DIM.
"A"		 DIM.
"B"		 LENGTH GIRTH WEIGHT
EACH
SILL WITH SOFFIT T-5191 1-1/4" 3-3/4" 10'-2" 9" 7.45#
T-5193 2-1/4" 4-3/4" 10'-2" 11" 9.10#
NOTE: · Specify angle indicated on drawing
ITEM PART
NUMBER		 DIM.
"A"		 DIM.
"B"		 LENGTH GIRTH WEIGHT
EACH
BOX SILL WITH SOFFIT T-5201 1-1/4" 3-3/4" 10'-2" 11" 9.01#
T-5202 1-1/4" 3-3/4" 20'-2" 11" 18.02#
T-5203 2-1/4" 4-3/4" 10'-2" 13" 10.64#
T-5204 2-1/4" 4-3/4" 20'-2" 13" 21.29#
NOTE: · Specify angle indicated on drawing
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
PARAPET HIGH SIDE EAVE FLASH-FIXED T-5211 4-1/2" 10'-2" 9" 7.40#
T-5212 4-1/2" 20'-2" 9" 14.80#
T-5213 5-1/2" 10'-2" 10" 8.27#
T-5214 5-1/2" 20'-2" 10" 16.40#
NOTE: · Specify angle indicated on drawing
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
PARAPET HIGH SIDE EAVE FLASH-FLOATING T-5215 N/A 10'-2" 13" 10.76#
T-5216 N/A 20'-2" 13" 21.29#
NOTE: · Specify angle indicated on drawing
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
PARAPET RAKE FLASH T-5217 N/A 10'-2" 9-1/4" 7.60#
T-5218 N/A 20'-2" 9-1/4" 15.05#
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
PARAPET RAKE CLEAT T-5219 N/A 10'-2" 2-1/2" 2.04#
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
COUNTERFLASH T-5225 N/A 10'-2" 4-1/2" 3.72#
T-5226 N/A 20'-2" 4-1/2" 7.39#
ITEM PART
NUMBER		 DIM.
"A"		 LENGTH GIRTH WEIGHT
EACH
Alternate Counter Flash T-5221 N/A 10'-2" 4-1/2" 3.48#
T-5222 N/A 20'-2" 4-1/2" 6.96#
ITEM PART
NUMBER		 DIM.
"A"		 DIM.
"B"		 LENGTH GIRTH WEIGHT
EACH
BOX RAKE T-5231 4" 3" 10'-2" 8-5/8" 7.04#
T-5232 4" 3" 20'-2" 8-5/8" 14.08#
T-5233 5" 3" 10'-2" 9-5/8" 7.85#
T-5234 5" 3" 20'-2" 9-5/8" 15.70#
T-5235 5" 4" 10'-2" 10-5/8" 8.67#
T-5236 5" 4" 20'-2" 10-5/8" 17.34#
T-5237 5" 5" 10'-2" 11-5/8" 9.62#
T-523

To the top