INSULATION PANEL SYSTEMS (IPS)
| FWP WALL PANEL | ||
| The FWP wall panel employs a flat appearance providing a monolithic look that is great for high-profile architectural applications. The interior skin has a Mesa profile. | ||
| Gauge: | Exterior: 22 Interior: 26 |  |
| Surfaces: | Exterior: Stucco-embossed Interior: Stucco-embossed | |
| Widths: | 36″ | |
| Thicknesses: | 2″, 2-1/2″, 3″ and 4″ | |
| Lengths: | Recommended maximum is 32′ | |
| Attachment: | Concealed clips | |
| R-Value | Maximum of R-30 | |
| IPP II WALL PANEL | ||
| The IPP II wall panel is designed for interior wall partitions and exterior wall applications. The appealing flat exterior and interior skins have a Mesa profile. The versatility of this panel allows for a uniform appearance from outside to in and from room to room in partition applications. | ||
| Gauge: | Exterior: 26; others available upon request Interior: 26 |  |
| Surfaces: | Exterior: Stucco-embossed Interior: Stucco-embossed | |
| Widths: | 36″ and 42″ | |
| Thicknesses: | 2″, 2-1/2″, 4″, 5″ and 6″ | |
| Lengths: | Recommended maximum is 40′ | |
| Attachment: | Concealed clips | |
| R-Value | Maximum of R-46 | |
| EWP II WALL PANEL | ||
| The traditional styling and distinct vertical lines of the EWP II is ideal for custom-designed or conventional building construction, especially commercial and industrial applications. The interior skin employs a Mesa profile. | ||
| Gauge: | Exterior: 26; others available upon request Interior: 26 |  |
| Surfaces: | Exterior: Stucco-embossed Interior: Stucco-embossed | |
| Widths: | 36″ | |
| Thicknesses: | 2″, 2-1/2″, 4″, 5″ and 6″ | |
| Lengths: | Recommended maximum is 40′ | |
| Attachment: | Concealed clips | |
| R-Value | Maximum of R-46 | |
| ESP II WALL PANEL | ||
| The exterior skin of the ESP II is profiled with minor striations giving it a flat look and providing a linear appearance while blending with the panel side joints. This panel is an excellent alternative to typical flat wall panels. The interior skin has a Mesa profile. | ||
| Gauge: | Exterior: 24 and 22 Interior: 26 |  |
| Surfaces: | Exterior: Stucco-embossed Interior: Stucco-embossed | |
| Widths: | 36″ and 42″ | |
| Thicknesses: | 2″, 2-1/2″, 3″ and 4″ | |
| Lengths: | Recommended maximum is 32′ | |
| Attachment: | Concealed clips | |
| R-Value | Maximum of R-30 | |
| SONORA™ WALL PANEL | ||
| Sonora’s exterior skin has a flat exterior profile with an Aztec-embossed pattern resembling old-world hand plaster. The interior profile employs a Mesa profile. | ||
| Gauge: | Exterior: 26; others available upon request Interior: 26 |  |
| Surfaces: | Exterior: Aztec-embossed Interior: Stucco-embossed | |
| Widths: | 42″ | |
| Thicknesses: | 2″, 2-1/2″, 3″ and 4″ | |
| Lengths: | Recommended maximum is 40′ | |
| Attachment: | Concealed clips | |
| R-Value | Maximum of R-30 | |
| RWP II ROOF/WALL PANEL | ||
| The versatility of the RWP II panel offers a multitude of design options. The RWP II can be utilized for roof or wall applications. The standard exterior skin is smooth but can be embossed if requested. The interior skin is roll-formed with our standard interior Mesa profile. The RWP II panel is the only IPS panel that utilizes a through-fastened attachment. | ||
| Gauge: | Exterior: 26, 24 and 22 Interior: 26, 24 and 22 |  |
| Surfaces: | Exterior: Smooth or embossed Interior: Stucco-embossed | |
| Widths: | 36″ | |
| Thicknesses: | 1-1/2″, 2″, 2-1/2″, 3″, 4″, 5″ and 6″ | |
| Lengths: | Recommended maximum is 35′ | |
| Attachment: | Through fastened | |
| R-Value | Maximum of R-46 | |
| IBL ROOF PANEL | ||
| The exterior profile of the IBL roof panel has a 2″-high standing seam with the Mesa profile. The interior profile is also a Mesa pattern. The IBL panel is attached to structures with concealed clips to ensure maximum R-values. | ||
| Gauge: | Exterior: 24 and 22 Interior: 26, 24 and 22 |  |
| Surfaces: | Exterior: Stucco-embossed Interior: Stucco-embossed | |
| Widths: | 40″, 30″ and 36″ | |
| Thicknesses: | 2″, 2-1/2″, 3″, 4″, 5″ and 6″ | |
| Lengths: | Recommended maximum is 50′ | |
| Attachment: | Concealed clips | |
| R-Value | Maximum of R-46 | |
| ROCKWALL COATING | |
| All of IPS’s wall panels are available with the Rockwall Finish system . The Rockwall Coating provides the advantage of steel wall panel construction with the durable beauty of stone aggregate. The coating process bonds real stone aggregate to the steel panels with a super adhesive system. A clear sealer is used to finish the panel with a crisp glazed appearance. | |
 | |
| Gauge: | 24 and 26 |
| Surfaces: | Granite Rock |
| Panels: | Insulated or non-insulated wall type |
| Colors: | Sandrock – light beige Granite Rock – several earthtone shades – light brown |
| Lengths: | Maximum recommended length is 20′ 0″ |
| Fasteners: | Concealed clips on insulated panels, color matched screw heads on exposed fastener panels, concealed fasteners on architectural panel. |
| Usages | The Rockwall finish is available on all IPS panel profiles: • IPS “RWP” Insulated Panel • IPS “ESP” Insulated Panel • IPS “IPP” Insulated Panel • IPS “EWP” Insulated Panel |
| Limitations: | For wall applications only. |