ROOFING, FACADE & NON-LOAD BEARING WALLS

ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5111	N/A	10′-2″	3″	2.45#
	NOTE: · Use with vertical applications only (Fascia)
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5121	N/A	10′-2″	3″	2.45#
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5131	N/A	10′-2″	3-1/2″	2.89#
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5102	N/A	10′-2″	5″	4.90#
	NOTE: · Use with HW-530 Plastic Vent Material
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	FL-254	N/A	10′-2″	6-3/4″	5.58#
	NOTE: · 24 gauge material – Galvalume Plus® only· Use with T-5089 or T-5090 Ridge Flash for Vent
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5141	4″	10′-2″	8-5/8″	7.04#
	T-5142	4″	20′-2″	8-5/8″	14.08#
	T-5143	3″	10′-2″	7-5/8″	6.14#
	T-5144	3″	20′-2″	7-5/8″	12.28#
	NOTE: · Specify roof slope or angle indicated on drawing Specify open hem when using w ith T-5121 Continuous Cleat
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5151	N/A	10′-2″	9-5/8″	7.81#
	T-5152A	N/A	10′-2″	5″	4.22#
	T-5152B	N/A	10′-2″	5-3/8″	4.30#
	NOTE: Use with roof slopes over 4:12· Specify roof slope or angle indicated on drawing Specify open hem when using with T-5121 Continuous Cleat
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5161	N/A	10′-2″	11″	9.00#
	T-5162	N/A	20′-2″	11″	18.00#
	NOTE: · Specify open hem when using with T-5121 Continuous Cleat· Specify roof slope or angle indicated on drawing
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5171	N/A	10′-2″	9″	7.37#
	T-5172	N/A	20′-2″	9″	14.74#
	NOTE: · Specify open hem when using with T-5121 Continuous Cleat Specify roof slope or angle indicated on drawing
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5181	1-1/4″	10′-2″	7″	5.73#
	T-5182	1-1/4″	20′-2″	7″	11.46#
	T-5183	2-1/4″	10′-2″	9″	7.37#
	T-5184	2-1/4″	20′-2″	9″	14.74#
	NOTE: · Specify angle indicated on drawing

ITEM	PART NUMBER	DIM. “A”	DIM. “B”	LENGTH	GIRTH	WEIGHT EACH
	T-5191	1-1/4″	3-3/4″	10′-2″	9″	7.45#
	T-5193	2-1/4″	4-3/4″	10′-2″	11″	9.10#
	NOTE: · Specify angle indicated on drawing
ITEM	PART NUMBER	DIM. “A”	DIM. “B”	LENGTH	GIRTH	WEIGHT EACH
	T-5201	1-1/4″	3-3/4″	10′-2″	11″	9.01#
	T-5202	1-1/4″	3-3/4″	20′-2″	11″	18.02#
	T-5203	2-1/4″	4-3/4″	10′-2″	13″	10.64#
	T-5204	2-1/4″	4-3/4″	20′-2″	13″	21.29#
	NOTE: · Specify angle indicated on drawing

ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5211	4-1/2″	10′-2″	9″	7.40#
	T-5212	4-1/2″	20′-2″	9″	14.80#
	T-5213	5-1/2″	10′-2″	10″	8.27#
	T-5214	5-1/2″	20′-2″	10″	16.40#
	NOTE: · Specify angle indicated on drawing
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5215	N/A	10′-2″	13″	10.76#
	T-5216	N/A	20′-2″	13″	21.29#
	NOTE: · Specify angle indicated on drawing
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5217	N/A	10′-2″	9-1/4″	7.60#
	T-5218	N/A	20′-2″	9-1/4″	15.05#
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5219	N/A	10′-2″	2-1/2″	2.04#
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5225	N/A	10′-2″	4-1/2″	3.72#
	T-5226	N/A	20′-2″	4-1/2″	7.39#
ITEM	PART NUMBER	DIM. “A”	LENGTH	GIRTH	WEIGHT EACH
	T-5221	N/A	10′-2″	4-1/2″	3.48#
	T-5222	N/A	20′-2″	4-1/2″	6.96#

ITEM	PART NUMBER	DIM. “A”	DIM. “B”	LENGTH	GIRTH	WEIGHT EACH
	T-5231	4″	3″	10′-2″	8-5/8″	7.04#
	T-5232	4″	3″	20′-2″	8-5/8″	14.08#
	T-5233	5″	3″	10′-2″	9-5/8″	7.85#
	T-5234	5″	3″	20′-2″	9-5/8″	15.70#
	T-5235	5″	4″	10′-2″	10-5/8″	8.67#
	T-5236	5″	4″	20′-2″	10-5/8″	17.34#
	T-5237	5″	5″	10′-2″	11-5/8″	9.62#
	T-523

To the top